Contacts

Windowspan Ltd

Manufacturers of the fabulous WINDOWSPAN ladder attachment (Patents Pending).



Benefits

Click the images on the right to view zoomed images.

  • Allows you to work on any part of the window from a ladder, high, low, left or right.
  • Paint bucket/tool Karabiner which slides left or right, and locks in chosen position.
  • Ingenious fully adjustable window recess lock lugs which slide left or right, in and out, to fit any width window up to 2 metres, (standard model). A 3 metre version is also available, which prevents the ladder sliding left or right.
  • Ability to screw to window recess brickwork via unique recess lock lugs so ladder cannot slide down, fall back, slide left or right.
  • Anti-slip rubber wheels to assist putting the ladder up, which can adjust in or out to stand off brickwork to accommodate obstructions, drainpipes etc.
  • Fits any ladder, and at last a safety harness can be attached to top rung to help prevent falls, provided ladder secured as per industry standards and unit secured to brickwork via suitable plug and screws through window recess lock lugs.
  • Lightweight aluminium construction (2.5 kg) and stainless steel fitting.
  • Great for cutting high hedges.
  • Adjustable flat wall lugs attach by plug and screw to any brick wall if core drilling etc., and prevent ladder sliding left or right, falling back or sliding down.
  • Front-fitting safety harness with short lanyard available.
  • Can be ratchet-strapped to a wooden bar inside window or in a room.

£250 + £32 Delivery


Or collect in person by prior appointment. Email us to arrange collection.

OR

Pay by BACS. Email us for bank details.

How to

Set up your Windowspan ladder attachment

DOWNLOAD SET UP INSTRUCTIONS
1

Lay the Windowspan on the ground with the ‘Ladder Lugs’ upright and ‘ladder Lock Bar’ removed, and the recess lock lugs fully retracted.
2

Place the ladder with top rung directly over the Windowspan ‘cross bar’ and 90 degrees to it.
3

Slide the ‘Ladder Lugs’ up to the ladder sides in a snug fit and tighten up the ‘Ladder Lugs’.
4

Slide the ‘Ladder Lock Bar’ through the ‘Ladder Lug’, ladder top rung and second ‘Ladder Lug’, ensuring that large Pan Washer is adjacent , to and on the outside of both ‘Ladder Lugs’, slide on the lock washer and screw on the 8mm nut finger tight ONLY.
5

Grip the ladder rung and the ‘Cross Bar’ with your left hand and squeeze together to ensure that the ‘Cross Bar’ and ladder sides are flat against each other and tighten up the lock nut.
DO NOT OVERTIGHTEN SO AS TO BEND THE ‘LADDER LUGS’
6

Incorrect set up.
6

Correct set up.

Set Up

Usage Disclaimer

Windowspan Ltd accepts no responsibility or liability whatsoever for miss-use of its products, through improper, careless or non-standard use.

It is the user’s responsibility to ensure that when using the Windowspan product, it must be in conjunction with current Standard Ladder Industry Practices, and that the base of the ladder to which the unit is attached is secured in a manner recommended by the Ladders and Working at Height (LAWH) Regulations so that it cannot slip, ideally the ladder should anchored to the wall to which it is intended to be leaned against.

The ladder must not exceed the 1in 4 rule.

The Windowspan product must not be used for any other purpose than designed.

The use of a safety harness requires that the Windowspan is securely screwed to the window recess, utilising the ‘recess Lock Lugs’,and the ‘wall lock lugs’ or alternatively secured through the window via a 50mm wooden bar and ratchet straps, and that the base is secured to the wall as per LAWH Requirements. The Operator should not undertake any work on ladders unless they are fully conversant with the current Government guidelines, available at :- https://www.hse.gov.uk/pubns/indg401.pdf, and have attended and passed the current training programme for working on ladders.

The use of the Windowspan product IS ENTIRELY AT THE OPERATORS RISK.

The 12 month warranty extends to replacement or repair only.

architeck-subscribe-image
Contact us for more information